| Part I FUNDAMENTALS |
|
|
Influence of External Fields on Sintering |
|
|
3 | (16) |
|
|
|
|
|
|
Liquid-Phase Sintering of the Systems with Interacting Components |
|
|
19 | (10) |
|
|
|
|
|
|
Simulation of Two-Dimensional Microstructural Development During Liquid Phase Sintering |
|
|
29 | (12) |
|
|
|
|
|
|
Sintering Kinetic Analysis by Dilatometric Data Obtained at Different Heating Rates |
|
|
41 | (14) |
|
|
|
|
|
|
|
|
|
|
|
Computer Study of Microstructure Formation by Rearrangement During Liquid Phase Sintering |
|
|
55 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Computer Simulation of Neck Growth During Sintering Process |
|
|
61 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Phenomenology of Sintering Kinetics Using UO2 as a Model |
|
|
67 | (8) |
|
|
|
|
|
|
|
|
|
|
|
Contraction of the Complex Models by the Stoichiometric Network Analysis |
|
|
75 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Electron Structure of YNi2 X2 (X = Si, P) Compounds |
|
|
81 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Computer Generation of Two-and Three-Dimensional Packings as a Background for Numerical Modeling of Sintering Processes |
|
|
89 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part II NANOSTRUCTURED POWDERS |
|
|
Scientific and Technological Problems in Nanostructured Materials Science |
|
|
97 | (6) |
|
|
|
|
|
|
Aerosol Synthesis of Nanostructured Materials |
|
|
103 | (10) |
|
|
|
|
|
|
Preparation of Fine, Spherical, Composite Powder by Spray Pyrolysis |
|
|
113 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Synthesis of Submicronic Oxide Powders by Aerosol Spray Pyrolysis: Modeling of the Evaporation Stage |
|
|
119 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Nanostructure Composition of Diamond-WC-Co |
|
|
125 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pecularities of Fine-Dispersion SiC and Si3 N4 Powders Obtained from Titanium-Magnesium Production Waste |
|
|
131 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Sintering of Nanocrystalline Zirconia-Based Ceramics |
|
|
137 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Analysis of Thermal Treatment of ZnO Derived by the Freeze-Drying Method |
|
|
143 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Effect of Shock-Wave Treatment on the Structural Characteristics of Synthetic Diamond Powders |
|
|
147 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Structural Properties of Ultradispersed Bi-Pb-Sr-Ca-Cu-O Particles Synthesized from Aerosol |
|
|
153 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interaction of the Powder Particles with the Plasma of the Impulse Discharges and the Use of This Process for Creation of Protective Coverages |
|
|
159 | (8) |
|
|
|
|
|
|
|
|
|
|
| Part III MECHANICAL ACTIVATION |
|
|
Mechanical Activation of BaCO3-Al2O3-SiO2 |
|
|
167 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanochemical Synthesis of Nanophased Carbide TiC |
|
|
175 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mathematical Modeling of Combustion-Type Interaction During Mechanical Alloying |
|
|
181 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Evolution of the Microstructure of Disperse ZnO During Mechanical Activation and Its Influences on Sinterability |
|
|
187 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Physical Properties of Mechanically Activated Grains |
|
|
193 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Change of the Physical-Chemical Characteristics of the Materials by Mechanical Activation |
|
|
199 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanically Activated BaCO3-Al2O3-SiO2 Mixture as an Additive for Liquid Phase Sintering of Si3 N4 |
|
|
205 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanical Activation of Mica |
|
|
211 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of Mechanical Treatment on Activation of the ZnO-SnO2 System |
|
|
219 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part IV SINTERING OF OXIDE SYSTEMS |
|
|
Vacuum Sintering of Zirconia Based Ceramics |
|
|
225 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A Study of Reactivity and Sinterability of Uranium Dioxide Powder through Surface Adsorption |
|
|
231 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Sintering and Creation of Porous Structure of Bioactive Ceramics |
|
|
237 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Analysis of the Sintering Process of ZnO and CdO by the Application of Sintering Diagrams |
|
|
245 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceramic Properties of the Sintered Materials in the Sn-Sb-Cu-O System |
|
|
251 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grain Growth in System CdO-Bi2 O3 |
|
|
259 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of the Composition and Time of Isothermal Sintering on the Microstructure of the CdO-Bi2O3 System |
|
|
265 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Characterization of Thick Films of Fe2O3 Obtained by Chemical Deposition |
|
|
271 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Evolution of the Surface and Internal Structure of Silica Aerogels During the Isothermal Sintering Process |
|
|
277 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sintering Conditions and Hydraulic Activity of 4CaO.3AI2O3.SO3 |
|
|
283 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermal Shock Behavior of Sintered Alumina Based Refractories |
|
|
289 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sintering of Sulphoaluminate Clinker |
|
|
295 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prognosis of the Mineralogical Composition of Sintered Portland Cement Clinker |
|
|
301 | (6) |
|
Lj. Petrasinovic-Stojkanovic |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EDS Analysis of Sintered Material Degradation in an Aggressive Environment |
|
|
307 | (10) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Evolution of the Phase Composition During Sintering of the MgO-Al2O3-SiO2 System |
|
|
317 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Experiences in the Chemical Gypsum-Phosphogypsum Preparation from the Triad ``Synthesis-Structure-Properties'' Viewpoint |
|
|
323 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model of Drawing Think Glass Sheet from a Rectangular Perform and Its Applications |
|
|
329 | (8) |
|
A. D. Milutinovic Nikolic |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crystallisation Kinetics of Layered Silicates in Glass |
|
|
337 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Effect of Atmosphere on HDS Catalyst Sintering |
|
|
341 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Stability of Porous Alumina Catalyst Support against Sintering |
|
|
347 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part V ELECTRONIC CERAMICS |
|
|
Synthesis and Sintering of PZT Ceramics |
|
|
355 | (12) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advances in Sintered Electronic Materials |
|
|
367 | (10) |
|
|
|
|
|
|
Sintering of ZnO Doped SnO2 |
|
|
377 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Far Infrared Properties of BaTiO3 Ceramics |
|
|
385 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Characterization of Domain Structure in BaTiO3 Based Ceramics by Scanning Electron Microscopy |
|
|
391 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fractals in Ceramic Structure |
|
|
397 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of Heating Rate on Sintering Process of BaTiO3 Ceramics |
|
|
403 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Microstructural Characterized BaTiO3-Composite Ceramics |
|
|
407 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semiconducting Properties of Doped Barium-Lead-Titanate Ceramics |
|
|
413 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Synthesis and Dielectric Properties of BaTiO3-Novolac Composite |
|
|
419 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resistivity Versus Geometry Relation in Bulk-Sintered and Thick Film MnCoFe-Oxide Thermistors |
|
|
425 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BaTiO3 Structure Prognosis |
|
|
431 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Synthesis and Sintering of Manganese Doped SnO2 in Several Atmospheres |
|
|
437 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sintering of MnZn Ferrite in the Presence of Bi2 O3 Phase |
|
|
445 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of Sintering on the Properties of Lithium Ferrite |
|
|
453 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part VI NON-OXIDE MATERIALS |
|
|
Developments in the Powder Metallurgy of Non-Oxide Cermets |
|
|
461 | (14) |
|
|
|
|
|
|
Sintering Behaviour and Microstructure Development in Electroconductive Si3N4-TiN Composites |
|
|
475 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Structural and Mechanical Characteristics of ZA27-7 wt.% SiC Composites |
|
|
483 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Explosive Consolidation of Aluminum Nitride Powder |
|
|
489 | (8) |
|
|
|
|
|
|
Characterization of Metal and Semiconducting Powders Using a Coherer |
|
|
497 | (10) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part VII SINTERING OF METAL POWDERS |
|
|
The Influence of Thermo-Plastic Deformation on the Structure and Mechanical Properties of Powder Metallurgy Materials |
|
|
507 | (12) |
|
|
|
|
|
|
The Influence of Sintering Conditions on the Microstructure and Magnetic Properties of Sintered SmCo5 Magnets |
|
|
519 | (8) |
|
|
|
|
|
|
|
|
|
|
|
A. D. Milutinovic-Nikolic |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of Different Binders and Metals on the Properties of Sintered Metal-Graphite Materials |
|
|
527 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermophysical Properties of Hot-Deformed Powder Materials |
|
|
531 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Copper Matrix Strengthening in Cu-Al2O3 System by Mechanical Alloying and Milling of Pure Copper and Prealloyed Copper Powders |
|
|
537 | (8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardening Mechanisms in Some Prealloyed PM Treated Copper Powders |
|
|
545 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recrystallization of Cold-Pressed Aluminium Powder |
|
|
551 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Generation of Dislocations During Cold Sintering of Iron Powder |
|
|
557 | (8) |
|
|
|
|
|
|
|
|
|
|
|
Investigation of Mathematical Rerlations between Technological Parameters and Properties of Cold-Sintered Iron |
|
|
565 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Thermal Recovery of Cold Sintered Mechanically Activated Powder System Cu70%Fe30% |
|
|
569 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Interface Characterization of Laminar Nickel-Alumina Composites |
|
|
575 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of Al2O3 Addition on Electrical Properties of Sintered Copper |
|
|
581 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Effect of the Deformation Degree on the Kinetics of Structural Relaxation of the Fe89.8 Si5.2 Co0.5 Amorphous Alloy |
|
|
587 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Investigating Possibilities of Sintering Process Monitoring by Acoustic Emission as an On-Line Method |
|
|
593 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Effect of Annealing on the Transport Properties of the Metastable Cu85 Co15 Alloy |
|
|
599 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Influence of Volume Fraction and Size of SiC Particles on the Mechanical Properties of Metal Matrix Composites |
|
|
605 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Investigation of the Microstructure and Distribution of Solute During Solidification of Al-Cu Alloy |
|
|
611 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A. D. Milutinovic-Nilokic |
|
|
|
|
|
Properties of Cold Rolled Sintered Copper Alloys after Annealing |
|
|
617 | (6) |
|
|
|
|
|
|
|
|
|
|
|
The Effect of Copper Contents on the Structure of the Aluminium-Copper Alloy |
|
|
623 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acousto-Electronic Superconducting Switch |
|
|
629 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
633 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thickness Dependences of Kinetic Properties of Quantum Wires of Pure and Doped Bismuth |
|
|
637 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Contributors |
|
643 | (12) |
| Index |
|
655 | |
Other versions by this Author
